Construction of the R-16 H-Tech garage door

Technical Specifications

Features

  • R-16 thermal resistance ?
  • Thickness: 1 ¾"
  • Polyurethane Insulation
  • Aluminum (Rustic woodgrain finish)
  • Dura+ hardware ?

Sizes

  • Widths from 8’ to 18’, in 1” increments.
  • Heights from 6’6” to 8’, in 3” increments.

Please contact us for more details on oversized doors available.

Layouts

Classic CC

Classic CC

Classic CC

ClassicCC 8ft

8'

ClassicCC 10ft

9' and 10'

ClassicCC 12ft

11' and 12'

ClassicCC 14ft

13' and 14'

ClassicCC 16ft

15'

ClassicCC 18ft

16' and 18'

Flush 2 Grooves 4 Grooves
Flush 2 Grooves 4 Grooves
8' to 18' 8' to 18' 8' to 18'
Flush
Flush
8' to 18'
2 Grooves
2 Grooves
8' to 18'
4 Grooves
4 Grooves
8' to 18'

Garaga construction makes all the difference

Durable icon

Rugged & Durable

Termally Efficient icon

Thermally Efficient

Refined icon

Refined Design

Durable icon

Rugged & Durable

Termally Efficient icon

Thermally Efficient

Refined icon

Refined Design

 1 
INTERLOKTM JOINT
Eco-Energetic icon Located between sections, this joint blocks air infiltration due to its triple-contact weatherseal.
Durable icon Makes sections very strong as it is mechanically interlocked and not bonded.

 2 
WOOD END BLOCKS
Eco-Energetic icon The most effective thermal breaks, they eliminate any transfer of cold or heat between materials.

 3 
REINFORCED METAL PLATES
Durable icon With 14-gauge thickness, they are used to solidly attach hinges, handles and operator bracket.

 4 
HIGH-PERFORMANCE WEATHERSTRIPPING
Eco-Energetic icon Our weatherstripping ensures increased weathertightness and stays flexible through the coldest temperatures.

 5 
POLYURETHANE
Eco-Energetic icon High-pressure injected foam provides R-16 thermal resistance for 1 ¾” doors.
Durable icon Because it adheres to the section walls, it provides a high level of rigidity to the door.

 6 
CONTINUOUS WOODGRAIN
Refined icon Up close or at a distance, our embossed woodgrain finish is flawless and very refined.

 7 
MOLDED WINDOW FRAMES
Refined icon Both our interior and exterior window frames are molded without joints or any visible screws. They are made of synthetic resin that is sun resistant to keep their good looks over the years.

 8 
FLEXIBLE TOP WEATHERSTRIPPING
Eco-Energetic icon Installed on the interior side of the top section, it helps to make the door even more weathertight.

Construction H-Tech

Econo icon

To save energy, all components of a garage door must be taken into consideration (joints between sections, weatherstripping, end blocks, etc.) and not just its thermal resistance R-value as that only refers to the construction of the sections.

Read more about energy-efficient garage doors

Back to FAQ